Trucks and Accesories

Cast Aluminum construction with Satin or GoldTone finish. Aluminum Pulley on Stainless Steel Axle. SEALED Upper and Lower Stainless Steel Ball Bearing Assemblies. 1-1/4" NPT Spindle. Stainless Steel Spindle option available (Add “SS” to Part Number – Example TRK-9416SS-GDT- Add $340). Factory-Attached Eagles are available. Contact Customer Service for size and pricing options.

Cast Aluminum construction with Satin or GoldTone finish. Aluminum Pulley on Stainless Steel Axle. SEALED Upper and Lower Stainless Steel Ball Bearing Assemblies. 1-1/4" NPT Spindle. Stainless Steel Spindle option available (Add “SS” to Part Number – Example TRK-9416SS-GDT- Add $340). Factory-Attached Eagles are available. Contact Customer Service for size and pricing options.

Cast Aluminum construction with Satin or GoldTone finish. Aluminum Pulley on Stainless Steel Axle. SEALED Upper and Lower Stainless Steel Ball Bearing Assemblies. 1-1/4" NPT Spindle. Stainless Steel Spindle option available (Add “SS” to Part Number – Example TRK-9446SS-GDT- Add $340). Factory-Attached Eagles are available. Contact Customer Service for size and pricing options.

Cast aluminum body in satin finish, choose you size below. Aluminum pulley on stainless steel axle. External Flagpole Trucks sit at the top of each flagpole, providing an exposed pulley and rope system for raising and lowering the flag. All Trucks are designed to accept Balls, Eagles and Finials. Cap Design Trucks install over the top of the flagpole and are attached with anchoring set screws or bolts. Spindle Design Trucks incorporate a threaded spindle which is installed into a female fitting welded into the top of the flagpole. Revolving Trucks rotate the flag with the wind.

Cast aluminum body in satin finish, choose you size below. Aluminum pulley on stainless steel axle. External Flagpole Trucks sit at the top of each flagpole, providing an exposed pulley and rope system for raising and lowering the flag. All Trucks are designed to accept Balls, Eagles and Finials. Cap Design Trucks install over the top of the flagpole and are attached with anchoring set screws or bolts. Spindle Design Trucks incorporate a threaded spindle which is installed into a female fitting welded into the top of the flagpole. Stationary Trucks are fixed and will not rotate.

Create external revolving systems from existing Stationary systems. Cast Aluminum construction. Tapped 1-1/4" NPT. Up to 2-1/2" Shaft Top Diameter provided with three (3) Stainless Steel Set Screws. 3"+ sizes provided with four (4) Stainless Steel Set Screws.

Heavyweight Cast Aluminum Body and Components. Double Aluminum Pulleys with Stainless Steel Axle. SEALED Upper and Lower Stainless Steel Ball Bearing Assemblies. 1-1/4" NPT Spindle. 1/2”-13”NC Top Drilling (5/8”-11NC Available). Recommended Halyard Diameter – 3/8".

Heavyweight Cast Aluminum Body and Components. Single Aluminum Pulley with Stainless Steel Axle. SEALED Upper and Lower Stainless Steel Ball Bearing Assemblies. 1-1/4" NPT Spindle. 1/2"-13NC Top Drilling (5/8"-11NC Available). Recommended Halyard Diameter – 3/8".